Loading…
Loading…
MS Engineering Management — an accredited Master's for people doing this work, not just reading about it.
Online or on campus
Management for engineers — project and product delivery, systems thinking, cost and quality, and leading technical teams. Mltio University runs this award on its two honest pathways — online from anywhere, or on campus in Minneapolis — to a single academic standard, with identity-checked assessment on both. This is an academic Master's award; where a field has a licensing or registration route, that remains a matter for your professional body or regulator. You will work through the material as a practitioner-researcher: applied methods, real or anonymised cases, and a supervised capstone or dissertation as the final component. Faculty mark whether you noticed the constraints a slide deck usually hides. MS Engineering Management is taught as one award, not a list of unrelated modules. The published length is 24 months, and the credit total is 36. Students move from Principles of Management & Leadership through Principles of Management & Leadership; Managerial Economics; Financial & Managerial Accounting; Marketing Management; Corporate Finance & Financial Management; Organisational Behaviour & HR Management, and finish on Strategic Consulting Capstone. Each course has a question, a method, and a submission. In this field, students draw the system, name the constraint that binds it, and compare two responses. Reading is a system description, an indicator note, and a project option paper. The artefact a marker expects is a recommendation for one decision, with the evidence and the downside. The award is built so that a graduate can do the following in practice: Set direction with a defensible strategy and connect it to an operating plan Read the numbers — accounting, finance, unit economics — well enough to challenge them Lead people and change through ambiguity Teaching assumes the student can read a source, attempt a problem before the seminar, and revise after feedback. Attendance at live seminars is part of the design. The capstone or final course must use the methods of the earlier courses; a project that ignores them does not pass. This course does not confer a professional engineering licence. The pages for each course name the topics that are examined. Those topics are the syllabus. A brochure line is not a substitute for them.
The programme carries 36 credits across four assessed modules. Delivery is tuition-free ($0) on the online pathway. Transcripts use letter grades and a GPA scale consistent with Mltio University awards. No professional-body logo is used in marketing to imply endorsement.
Study online
Online tuition is free. Online examinations are free. There is no exam fee for online study.
On-campus study
Prefer to learn at our Minneapolis campus? On-campus delivery includes tuition fees, in-person seminars, and access to university facilities.
| Code | Course | Credits · hours |
|---|---|---|
| MX72101 | Principles of Management & Leadership Principles of Management & Leadership (MX72101) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using Principles of Management & Leadership as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
| MX72102 | Managerial Economics Managerial Economics (MX72102) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using Managerial Economics as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
| MX72103 | Financial & Managerial Accounting Financial & Managerial Accounting (MX72103) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can read a set of figures, build a small case, and state which assumption moves the result, using Financial & Managerial Accounting as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses financial statements, a recognition note, and a risk report. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation that separates the decision, the numbers, and the risk. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer an accounting, audit, or financial-services licence.
| 3 · 30 h |
| Code | Course | Credits · hours |
|---|---|---|
| MX72105 | Marketing Management Marketing Management (MX72105) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using Marketing Management as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
| MX72106 | Corporate Finance & Financial Management Corporate Finance & Financial Management (MX72106) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can read a set of figures, build a small case, and state which assumption moves the result, using Corporate Finance & Financial Management as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses financial statements, a recognition note, and a risk report. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation that separates the decision, the numbers, and the risk. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer an accounting, audit, or financial-services licence.
| 3 · 30 h |
| MX72107 | Organisational Behaviour & HR Management Organisational Behaviour & HR Management (MX72107) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using Organisational Behaviour & HR Management as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
| Code | Course | Credits · hours |
|---|---|---|
| MX72109 | Strategic Management Strategic Management (MX72109) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using Strategic Management as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
| MX72110 | Business Ethics, Law & Corporate Governance Business Ethics, Law & Corporate Governance (MX72110) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can say who decides, under which rule, and draft a note a professional could read, using Business Ethics, Law & Corporate Governance as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a statute or instrument, a case or policy paper, and a commentary. Seminar time is for the decision, not for reading the materials aloud. Assessment is a memo or draft clause with sources and a revision note. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course is academic. It does not admit the student to practise law and it is not a qualifying law degree.
| 3 · 30 h |
| MX72111 | International Business & Global Economics International Business & Global Economics (MX72111) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using International Business & Global Economics as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
| Code | Course | Credits · hours |
|---|---|---|
| MX72113 | Leadership Communication & Executive Negotiation Leadership Communication & Executive Negotiation (MX72113) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using Leadership Communication & Executive Negotiation as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
| MX72114 | Innovation & Corporate Entrepreneurship Innovation & Corporate Entrepreneurship (MX72114) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using Innovation & Corporate Entrepreneurship as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
| MX72115 | Strategic Consulting Capstone Strategic Consulting Capstone (MX72115) is a 3-credit course on MS Engineering Management, with 30 notional learning hours. By the end, students can draw the system, name the constraint that binds it, and compare two responses, using Strategic Consulting Capstone as the working context rather than a generic management example. The course is taught in three movements. First, students establish the terms and the decision the course is about. Second, they apply the method to a case, dataset, text, or design and compare it with a weaker alternative. Third, they revise the work after feedback and state what the conclusion cannot support. Preparation uses a system description, an indicator note, and a project option paper. Seminar time is for the decision, not for reading the materials aloud. Assessment is a recommendation for one decision, with the evidence and the downside. A pass requires a clear method, evidence a marker can check, and an explicit limit. Credit is not awarded for summary alone. This course does not confer a professional engineering licence.
| 3 · 30 h |
Modules are assessed through a published mix of coursework, applied projects, and examinations. Exam windows are announced in advance so students in other time zones are not forced into overnight sittings. Alternative arrangements are available where documented.
The published duration is 24 months. Teaching language: English (Minneapolis campus or tuition-free online; one academic standard). Actual time-to-complete depends on mode and any recognised prior learning.
You may study this award fully online from your country, or — where published — on campus at Mltio. Online study does not require a student visa. Campus study may.
Degree tuition for this award is published as £0 / tuition-free on the online pathway. Examination or administrative fees may apply at checkout — never an annual tuition invoice. Check the Fees page for any extras.
Requirements are grouped on this page (academic, English, documents). Equivalent qualifications are considered. English may be waived after prior English-medium study.
Assessment is typically a mix of coursework, projects, and examinations. Doctoral awards include a thesis or dissertation and an oral examination. Details sit in the programme specification and module outlines.
Recognition of the award for local employment, professional licence, or ministry attestation is decided by your employer or regulator. Mltio University publishes verification pages for certificates. We do not claim automatic equivalence in every country.
Start an application on this website. Progress is saved from the first step. Admissions: admissions@mltio.com.
Recognized & Accredited
